Zigbee thermostat devices
- TRV = Thermostatic Radiator Valves
Sonoff TRVZB
- Product site
- Very quiet!
- HA forum: Less Z2M support for Sonoff TRVZB
- Zigbee2MQTT: SONOFF TRVZB
- Supports
local_temperature_calibration - Sonoff TRVZB is missing attributes that can be exposed, yet configurable using a SEND, SET command
- Supports
Reset / enter pairing mode:
- In manual mode, turn the knob counterclockwise. When the screen
displays
OF, press and hold the middle button for 3 seconds and the screen iconiflashes. Now the device enters Pairing mode. - If the device fails to pair with the gateway within 3 minutes after it enters Pairing mode, the device will exit the pairing status.
- If you want to pair again, please press and hold the middle button
for 3 seconds until the icon
OFflashes when the screen shows
Factory reset:
- Press “Middle button” for a longer time and
at the same time put batteries in,
then the screen displays
FRand blinks for 3 seconds.
Battery low:
- Display shows
F4and a battery symbol - Change batteries
- Display shows
iN - Short press on the middle button, (target) temperature will be shown
home-assistant integration
Better Thermostat for HA
- Website / Docs
- Better thermostat UI card
- Night time schedule blueprint
- Before creating an nighttime automatation with this blueprint, manually create a custom nighttime schedule that can be used when creating the automation.